READ ME: GERMAN

Die Beispielmap zeigt ein Skript, das eine Art Autopilot simulieren soll.
Der Autopilot hlt den Hubschrauber des Spielers relativ konstant auf 
einer Hhe von 25 m ber dem Boden. Fr Flugzeuge ist der Autopilot 
weniger geeignet. 
Dabei wird kein Anspruch auf besonderen Realismus erhoben, der Spielspa 
steht hierbei eindeutig im Vordergrund.

Mit dem Autopiloten werden auch steile Klippen gefahrlos berwunden, lediglich das 
berfliegen der hchsten Hochhuser kann zu Abstrzen des Helis fhren.

Der Pilot sollte also trotz des Autopiloten eine geeignete Flugroute whlen.

Die automatische Hhenkorrektur erfolgt mit dem SetVelocity- Befehl. Die Steuerung 
des Helis reagiert deshalb leider teilweise etwas trge.

Das Script ist im Augenblick nur Single Player fhig.

Mit der Zeile "MAP_AutoPilotHeight = x" in der "init.sqs" kannst du die Hhe bestimmen, 
in der der Heli fliegen soll (x mit einer Zahl ersetzen).

Fr das Skript habe ich die "GetASLHeight"- Funktion von TakeOffTim und die "OverWater"- 
Funktion von snYpir verwendet.

Verbesserungsvorschlge sind willkommen unter: BadAss@mapfact.net.

Vielen Dank fr den Download und viel Spa mit dem Autopiloten!

BadAss, im Januar 2005.
;---------------------------------------------------------------------------------------------


READ ME: ENGLISH

This little example mission shows some kind of autopilot. The autopilot lets 
your chopper fly constantly in a height of 25 m above the ground, automatically.
It's not recommended for airplanes.
This autopilot is not supposed to be very realistic, it's rather meant to grant 
you some playing fun.

With the autopilot you can easily fly over steep cliffs. Flying over high houses 
can lead to crashs anyway.

The pilot is supposed to choose a suitable flight route still.

The correction of your flying height is done with the SetVelocity command so 
piloting the chopper gets a little sluggish sometimes.

At the moment the autopilot works in Single Player only.

You can define the height you want to fly in  with MAP_AutoPilotHeight = x 
(substitute x with a number).

For this script I used the "GetASLHeight" function by TakeOffTim and the 
"OverWater" function by snYpir.

Suggestions are welcome, send them to: BadAss@mapfact.net.

Thank you for downloading and have fun!

BadAss, January 2005.
